envo® mask N95 Respirator Kit with exhalation Valve
envo® mask N95 Respirator Kit with exhalation Valve
Each kit includes one (1) respirator mask, five (5) filters, your choice of headgear, a plug, and storage case.
Couldn't load pickup availability
Details
Approved by the National Institute for Occupational Safety & Health (NIOSH), the reusable N95 envo® mask respirator is designed for superior comfort and seal.
Each kit includes an N95 envo® mask respirator with the following features:
- A lightweight plastic body that enables easy cleaning and filter changes.
- Patented, latex-free AIRgel® cushion technology that contours around the face, providing secure, all-day comfort and freedom from foggy eyewear.
- Exhalation valve that allows for a cooler breathing experience with less resistance, while the provided plug offers users the option of two-way protection.
- One adult size designed to fit most faces. If you are taller than 5’2” and shorter than 6’2”, it is likely that the mask will fit.
- The envo® mask measures approximately 4 inches (10 cm) from top to bottom and 5 inches (12 cm) from side to side. The mask should rest easily on the bridge of your nose, cheeks, and chin. For those with petite facial features, a larger than average or elongated nose, or a wide and flat nose bridge, the mask may not fit or obtain a seal.
The kit also includes:
- Five (5) individually packaged filters that remain electrostatically charged until ready to use.
- An optional vent plug that enables users to filter their exhaled air.
- Your choice of a traditional Holo head strap or QuickFit earhooks.
- A slim case for easy transport.
Note: Only envo® mask N95 filters are compatible with the envo® mask respirator body. No other filter may be used with the envo® mask body, regardless of fit. Please dispose of filters immediately following contamination or damage.
Features and Benefits
NIOSH-approved
Filters that are compliant with guidelines for N95 respirators.
Reusable
Easy-change filters and a washable plastic frame ensure long-term efficacy.
Superior protection and fit
AIRgel® technology conforms to the user’s face, providing a secure seal that helps to reduce air leakage.
Minimal skin irritation
Superior comfort means minimal mask-related pain or damaged skin.
Fog-resistent
The secure AIRgel® seal helps to prevent fogging of glasses or goggl
Long-term wear
Envo® mask was designed for all-day comfort and protection.
These are truly great masks. Easy to put on, comfortable fit, and breathe easily without fogging. That last feature points out the most important thing with a respirator, that it seals to your face and keeps filth out. One of us works daily with the public, but we have been wearing these since early 2020 and have not had so much as a cold in those 5 years!
Hard to argue with that success.
The only fault these masks have is longevity. We have to replace these every 4-6 months due to the film sealing the gel failing, so that could use some improvement.
To start, the gel cushion is great -- easily the most comfortable seal I've had on a respirator. I've got a fairly thin nose and have problems finding respirators that can actually make a good seal around my nose without putting a ton of pressure on it, but this is comfortable enough that I can still breath through my nose while I have it on, so that's great. The head strap is also very comfortable; I barely even notice it's there.
There are two down sides: one is that the mask is very shallow. The tip of my nose touches the front of my mask, and my bottom lip touches a small rubber nib connected to the exhalation valve, and both of those things are fairly distracting. The other is that I'm really not a fan of where the bottom of the mask rests; it pushes my bottom lip into my teeth, which gets very uncomfortable after a few hours. Is it worth the tradeoff of being comfortable around my nose? Hard to say. It's a shame because if this mask was just a mm or two deeper and went under my chin, it would be by far the most comfortable respirator I've ever worn.
The mask is easy to use, comfortable to wear, and fits snugly without discomfort (such as nose bridge pinching) or itch that can occur with some traditional N95s. I have a larger-than-average nose with and uneven nose bridge around which I have a hard time getting a good seal to prevent eyeglass fogging with traditional N95s. This is the first mask with which my glasses have not fogged. during normal use, I have no problems. I sweat easily and with exertion some condensation can collect along the lower inner edge of the mask; easily addressed with a facial tissue. I am going to experiment cutting some small dental cotton rolls in half lengthwise to use as batting along the lower inner edge of the mask, I'll report back if it's a big fail.
I got this for in-person classroom teaching in COVID times. As others have said, the gel cushion is soft and comfortable. It seals fairly well to my face, but not perfectly. I rarely have fogged glasses when wearing this mask, but I can detect a little leakage now and then if I bend over or tilt my head, or perhaps when I adopt certain facial expressions. I have an odd nose, with a very narrow bridge and some wrinkles, so others may not have this leakage problem. In any case, there is much less leakage with this mask than with any others I've tried. My main criticism is that I think it needs more depth. My nose is not unusually protruberant, but the tip of my nose contacts the inside of the mask frame, and those horizontal struts of the plastic frame are very sharp-edged. I sanded to round them off, which helped, but it's still annoying to feel my nose in contact with the frame. And my lips contact the back of the exit valve (which I have blocked with the plug). Another few millimeters of space inside the mask would eliminate these annoyances. My other complaint is the head straps. They are very light-weight and began to fray after just a few wearings. I've only worn the mask for one semester, but I'm sure the straps will need replacing in the near future to the tune of $19 and shipping. I have a shop respirator for dust that I've used for 25 years, and the straps are still in good shape, so there are more durable alternatives. All in all a good design that I'm really glad to have found for COVID protection, but that could use a few tweaks to be even better.
I've just started at a large hospital in the Covid unit. The traditional masks with the metal stays for the seal were leaving my face sore and literally bruised. I ordered the Envo and I'm overjoyed with the comfort, ease, and protection. Does not fog my glasses either. There is some condensation on interior of mask, as others have state, but, to me, that is another sign of the excellent seal around my face. Compared to the traditional masks and pain endured while wearing, this mask is a lifesaver! Literally!! Love it!!
FAQ's
Which headgear comes with the envo® mask respirator?
Which headgear comes with the envo® mask respirator?
When ordering on envomask.com, you may choose between the Holo or QuickFit headgear. The Holo headgear is automatically the default option if you do not select a headgear
Where are your respirators manufactured?
Where are your respirators manufactured?
Sleepnet Corporation manufactures the envo® mask and the envo® pro in the USA at its headquarters in Hampton, New Hampshire.
Where do you ship?
Where do you ship?
We currently only ship to the United States and Canada.
What are the envo® mask filters made of?
What are the envo® mask filters made of?
The envo® mask N95 filters are four layers, including proprietary fibers, making the envo® mask one of the lowest resistant masks on the market. Lower resistance equates to easier breathability.
What is the warranty for my envo® mask or envo® pro?
What is the warranty for my envo® mask or envo® pro?
Envo® offers a 90-day warranty against manufacturing defects.
What is the purpose of the vent plug on the envo® mask?
What is the purpose of the vent plug on the envo® mask?
The vent plug provides two-way protection in the envo® mask that comes with an exhalation valve. Without the plug, the mask with an exhalation valve protects you from environmental particulates only. If you choose to use the plug, it will protect others from your air droplets that may carry a virus. The vent plug installs inside the filter cover and plugs the vent holes. If you purchase a mask without an exhalation valve, you do not need to use the vent plug.
What is the purpose of the envo® mask shield?
What is the purpose of the envo® mask shield?
The envo® mask shield is a physical barrier that protects the filter. Install the shield by clipping it onto the mask’s filter cover. It is an added measure of protection for those working in harsher environments. The shield only works with the envo® mask respirator.
What is in the envo® mask kit?
What is in the envo® mask kit?
Each envo® mask respirator kit comes with a mask body, filter cover, five N95 filters, vent plug, storage case, and choice of headgear: Holo or Quickfit.
- Mask body: The mask body is the main component of the mask, with an interior gel cushion and outer plastic frame that holds the filter.
- Filter cover: The filter cover is a plastic frame that holds the filter in place on top of the mask body.
- N95 Filter (5): Each kit comes with five filters that are N95 certified by NIOSH.
- Vent Plug: The vent plug is a white plastic plug that installs inside the filter cover and plugs the vent holes.
- Storage Case: The storage case makes it easy to keep all of your mask components clean and in one place.
- Choice of Headgear: The Holo headgear fits on the crown of your head. The QuickFit headgear has hooks that fit around your ears.